Custom designed 52z base

I started a run on a few 52z base/caps with that copper-green look to them and added a light scene to the bottom at the same time raised the base like the Astros have. A few holes were drilled to make it so with stainless steel bottoms which worked out great. I will add more as I continue with this project. The painting was fun since you only get one chance as you make it happen. 

Views: 341

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mr MaGoo on February 14, 2015 at 9:06pm

Bohdan, what did you use for the feet and how did you attach them.  Nice touch to a classic lamp base.

Permalink Reply by Bohdan on February 15, 2015 at 1:33pm

Thanks I used metal chair gliders found in the Home depot. These came with screw ends and they were screwed thru the drilled holes. I had removed the bottom plate and added a socket with 15w bulb for that lit bottom base.

Permalink Reply by ElectricAstro on February 15, 2015 at 4:26pm

I really like this idea! Really neat to allow the light to go around the base. Another great custom from Bohdan.

Permalink Reply by Claude J on March 22, 2018 at 9:12pm

Much better than that crappy felt that creates rust and that I keep having to replace

BTY< I have some green felt for those "vintage" lamps that may need restoration

RSS

© 2024   Created by ElectricAstro.   Powered by

Badges  |  Report an Issue  |  Terms of Service