This Wizard Grande took some time to make. To give you some idea on the size the robot is 24" tall the lamp is 22" tall. The base uses an angle bracket x2 with 2-60watt bulbs. It also has a special coil that was needed for extra heat gain .

Views: 127

Comment

You need to be a member of WWW.OOZINGLAVA.COM | The Fantastic Forum for Lava Lamps to add comments!

Join WWW.OOZINGLAVA.COM | The Fantastic Forum for Lava Lamps

Comment by ElectricAstro on September 24, 2016 at 1:12pm

This photo always makes me smile, I love it.

Comment by ElectricAstro on September 23, 2016 at 6:44am

I like the silver edging on the edge of the cap and the base!

Comment by Bohdan on September 22, 2016 at 12:37pm

Thank you. This was one very interesting project to make happen and took time but turned out great.

Comment by Enigma of the Giant Mistrolite on September 21, 2016 at 7:26pm
I'm a bit slow on the uptake. Didn't realise this was from more than two years ago! Never mind, you created a timeless classic here Bohdan!
Comment by Enigma of the Giant Mistrolite on September 21, 2016 at 7:24pm
All I can say is wow! What an excellent job! Great retro look also.
Comment by George on September 20, 2016 at 3:20pm
What a great custom lamp, you made it really well.
Comment by ElectricAstro on July 29, 2016 at 9:57am

This is one of my favourite lava lamp photos of all time, look at how that lava flows!

Comment by Bohdan on July 4, 2014 at 10:01am

What the inside of the base looks like with the 2 angle brackets that can be bent to raise or lower the bulbs.

Comment by Bohdan on July 3, 2014 at 10:19am

Here is a photo of the coil that I used for this project. It is much bigger and better to hold the needed heat.

Comment by ElectricAstro on July 2, 2014 at 5:31am

Beautiful workmanship. I love the pinhole detail on the base. If only we could buy these :)

© 2025   Created by ElectricAstro.   Powered by

Badges  |  Report an Issue  |  Terms of Service